User`s manual

Windows 98 CD ROM and key in its path. Then click on

the OK button to key in path.

3. Click on the Finish button to finish installation process. And

allow the system to reboot.

4. The LCD signal may be turned off automatically after the VGA

driver is installed, please press "Ctrl+Alt+F3" to enable LCD

signal again.

LAN Driver Installation

We strongly recommend that you shall not install LAN driver by

clicking on Autorun Exe. Please follow the steps in order to finish the

process of installation.

1. Click on Start button

→

Settings

→

Control Panel

→

System

2. Select Device Manager under the Hardware category.

3. Double click on the Ethernet controller and select update

Driver button under the Driver category.

4. Click Next twice and click the Specify a location option.

5. Click Next and choose a route where you want place the folders

on before you click on open.

6. Click Next

→

Yes

→

Finish and the window will show you

how to finish the installation process.

Note: We strongly recommend that you shall not install LAN driver

by clicking on Autorun. Exe.

FPC 1502 Series CyberResearch

Panel PCs