User`s manual

CyberResearch
®
CPU Cards CZGG LU-10-X Series
CyberResearch, Inc. 79
25 Business Park Drive P: [phone]; F: [phone]
Branford, CT USA www.cyberresearch.com
Secondary IDE channels including the Primary Master,
Primary Slave, Secondary Master and Secondary
Slave.
 IDE Master and IDE Slave
When entering setup, BIOS auto detects the presence of IDE devices. This displays the
status of the auto detected IDE devices. The following IDE devices are detected and are
shown in the IDE Configuration menu:
 Primary IDE Master
 Primary IDE Slave
 Secondary IDE Master
 Secondary IDE Slave
 Third IDE Master
 Third IDE Slave
The IDE Configuration menu (BIOS Menu 4) changes the configurations for the IDE
devices installed in the system. If an IDE device is detected, and one of the above listed
four BIOS configuration options are selected, the IDE configuration options shown in
Section 5.4.2.1 appear.
 Hard Disk Write Protect [Disabled]
The Hard Disk Write Protect BIOS option protects hard disks from being overwritten.
This menu item is only effective if the device is accessed through the BIOS.

Disabled (Default) Allows hard disks to be overwritten

Enabled Prevents hard disks from being overwritten
 IDE Detect Time Out (Sec) [35]
The IDE Detect Time Out (Sec) BIOS option specifies the maximum time (in seconds) the
AMI BIOS searches for IDE devices. This allows the settings to be fine-tuned and allows
faster boot times. The following configuration options are available.
 0 seconds
 5 seconds (Default)
 10 seconds
 15 seconds
 20 seconds