User`s manual

CZGG LU-10-X Series CyberResearch

CPU Cards

5.1 Introduction

A licensed copy of AMI BIOS is preprogrammed into the ROM BIOS. The BIOS setup

program allows users to modify the basic system configuration. This chapter describes

how to access the BIOS setup program and the configuration options are user

configurable.

5.1.1 Starting Setup

The AMI BIOS is activated when the computer is turned on. The setup program can be

activated in one of two ways.

1. Press the D

ELETE key as soon as the system is turned on or

2. Press the D

ELETE key when the “Press Del to enter SETUP” message

appears on the screen.0.

If the message disappears before the user responds, restart the computer and try again.

5.1.2 Using Setup

Use the arrow keys to highlight items, press ENTER to select, use the PageUp and

PageDown keys to change entries, press F1 for help and press E

SC to quit. Navigation

keys are shown in.

Key Function

Up arrow Move to previous item

Down arrow Move to next item

Left arrow Move to the item on the left hand side

Right arrow Move to the item on the right hand side

Esc key Main Menu – Quit and not save changes into CMOS

Status Page Setup Menu and Option Page Setup Menu --

Exit current page and return to Main Menu

Page Up key Increase the numeric value or make changes

Page Dn key Decrease the numeric value or make changes

F1 key General help, only for Status Page Setup Menu and Option

Page Setup Menu

F2 /F3 key Change color from total 16 colors. F2 to select color

forward.

F10 key Save all the CMOS changes, only for Main Menu