User`s manual

CyberResearch
®
CPU Cards CZGG LU-10-X Series
CyberResearch, Inc. 69
25 Business Park Drive P: [phone]; F: [phone]
Branford, CT USA www.cyberresearch.com
4.3.5.2 Compact Flash Connector
The compact flash connector is located on the bottom of the daughter expansion board. If
a user wishes to implement the CF connector for CD drive connectivity, please follow
these instructions.
Step 1: Connect one end of a ribbon cable to the IDE2 connector on the CZGG LU-10-X
CPU Card.
Step 2: Connect the other end of the same ribbon cable in Step 1 to the IDE1 connector
on the expansion daughterboard. Step 0:
4.4 Chassis Installation
After the DIMM modules have been installed and after the internal peripheral connectors
have been connected to the peripheral devices and the jumpers have been configured,
the CZGG LU-10-X can be mounted into chassis.
To mount a board into a chassis, please refer to the chassis user guide that came with the
product.
4.5 Rear Panel Connectors
4.5.1 LCD Panel Connection
The conventional CRT monitor connector, VGA1, is a 15-pin, female D-SUB connector.
It can be connected to an external monitor.
4.5.2 Ethernet Connection
The rear panel RJ-45 connectors can be connected to an external LAN and communicate
with data transfer rates up to 100M/s.
4.5.3 USB Connection
The rear panel USB connectors provide easier and quicker access to external USB
devices. The rear panel USB connector is a standard connector and can easily be
connected to other USB devices.