User`s manual

CZGG LU-10-X Series CyberResearch

CPU Cards

4.3.4.1 18-bit TTL Connectivity

To correctly install the LCDC LVDS-LUKE-A daughterboard to support an 18-bit TTL

display, please follow the instructions below.

Step 1: Correctly orientate the LCDC LVDS-LUKE-A daughterboard. The VIA chipset on

the LCDC LVDS-LUKE-A daughterboard should be on the side of the LCDC

LVDS-LUKE-A facing the gold finger backplane connectors. The VIA chipset on

the LCDC LVDS-LUKE-A should be on the side closest to the CPU.

Step 2: Align the connectors on the bottom of the LCDC LVDS-LUKE-A with pins 1 –

pins 26 on the J1 and J3 connectors.

Step 3: Slide the LCDC LVDS-LUKE-A onto the connectors. Pin 27 and pin 28 on both

the J1 and J3 connector should be visible. See Figure 4-2.

Figure 4-2: 18-bit TTL LCDC LVDS-LUKE-A Connectivity