User`s manual

CZGG LU-10-X Series CyberResearch

CPU Cards



Optional LCDC LVDS-LUKE-A daughterboard

 Peripheral devices

4.3.3 DIMM Module Installation

4.3.3.1 Purchasing the Memory Module

When purchasing DIMM modules, the following considerations should be taken into

account: to 1GB of 333MHz or 400MHz of DDR memory

 The DIMM module can support a memory chip with a maximum size of 1GB

 The DIMM module can have a of 333MHz or 400MHz

 The DIMM can be either single-sided or dual-sided.

4.3.3.2 DIMM Module Installation

The CZGG LU-10-X CPU Card has two DDR SDRAM DIMM sockets. To install the DIMM

modules, follow the instructions below and refer to Figure 4-1.

Step 1: Pull the two white handles on either side of the DIMM socket down.

Step 2: Align the DIMM module with the DIMM socket making sure the matching pins

are correctly aligned.

Step 3: Insert the DIMM module slowly. Once it is correctly inserted, push down firmly.

The white handles on either side of the socket move back up and lock the

module into the socket. Step 0: