User`s manual

CZGG LU-10-X Series CyberResearch

CPU Cards

4.2 Unpacking

NOTE:

If any of the items listed below are missing when the CZGG LU-10-X is

unpacked, do not proceed with the installation and contact CyberResearch,

Inc. immediately.

4.2.1 Unpacking Precautions

Some components on CZGG LU-10-X are very sensitive to static electricity and can be

damaged by a sudden rush of power. To protect it from being damaged during the

unpacking process, follow these precautions:

 The user should be grounded to remove any static charge before touching the

CZGG LU-10-X . Users can wear a grounded wrist strap at all times or

frequently touch any conducting material that is connected to the ground to

discharge static electricity.

 Handle the CZGG LU-10-X by its edges. Do not touch the IC chips, leads or

circuitry unnecessarily.

Do not place a PCB on top of an anti-static bag. Only the inside of the bag is safe from

static discharge.

4.2.2 Checklist

When CZGG LU-10-X is unpacked, please make sure the package contains the following

items.

 1 x CZGG LU-10-X CPU card

 1 x Mini jumper pack

 1 x IDE flat cable 40p/40p/40p

 2 x SATA cables

 1 x SATA power cable

 1 x RS-232 cable

 1x USB cable

 1 x Audio cable

 1 x KB/PS2 Mouse Y cable

 1 x Utility CD