User`s manual

CyberResearch
®
CPU Cards CZGG LU-10-X Series
CyberResearch, Inc. 61
25 Business Park Drive P: [phone]; F: [phone]
Branford, CT USA www.cyberresearch.com
4.1 Installation Considerations
NOTE:
The following installation notices and installation considerations should be
read and understood before the CPU card is installed. All installation
notices pertaining to the installation of the CPU card should be strictly
adhered to. Failing to adhere to these precautions may lead to severe
damage of the CPU card and injury to the person installing the CPU card.
4.1.1 Installation Notices
Before and during the installation of the CZGG LU-10-X CPU card, please do the
following:
 Read the user manual
o The user manual provides a complete description of the CZGG LU-10-X
CPU card, installation instructions and configuration options.
 Wear an electrostatic discharge cuff (ESD)
o Electronic components are easily damaged by ESD. Wearing an ESD cuff
removes ESD from the user’s body and help to prevent ESD damage.
 Place the CPU Card on an antistatic pad
o When the CPU Card is installed and configured, place it on an antistatic
pad. This helps to prevent potential ESD damage.
 Turn off all power to the CZGG LU-10-X CPU card
o When working with the CPU card, make sure that it is disconnected from
all power supplies and that no electricity is being fed into the system.
Before and during the installation of the CZGG LU-10-X CPU card, DO NOT:
 remove any of the stickers on the PCB board. These stickers are required for
warranty validation.
 use the product before all the cables and power connectors are properly
connected.
 allow screws to come in contact with the PCB circuit, connector pins, or its
components.