User`s manual

CyberResearch
®
CPU Cards CZGG LU-10-X Series
CyberResearch, Inc. 55
25 Business Park Drive P: [phone]; F: [phone]
Branford, CT USA www.cyberresearch.com
Jumper Label: JP1
Jumper Type: 6 pin header
Jumper Settings: See Table 3-30
Jumper Location: See Figure 3-26
This jumper allows the user to set the voltage for the LCD panel. Before setting this jumper
please refer to the LCD panel user guide to determine the required voltage. After the
required voltage is determined, make the necessary jumper setting in accordance with the
settings shown in Table 3-30.
JP1 DESCRIPTION
Short 1-2 3V(Default)
Short 3-4 5V (Default)
Short 5-6 12V
Table 3-30: JP1 Jumper Settings
The pin locations are shown in Figure 3-26 below.
Figure 3-26: JP1 Pinout Locations