User`s manual

CZGG LU-10-X Series CyberResearch

CPU Cards

Ethernet connector RJ-45 LAN2

Keyboard/mouse connector PS/2 KB/MS1

USB connector USB port USB1

Table 3-2: Rear Panel Connectors

3.1.4 Jumpers

Table 3-3 lists jumpers found on both the CZGG LU-10-X CPU card and the LCDC

LVDS-LUKE-A. Detailed descriptions of these jumpers can be found in Section 3.3.4 on

page 53. (See Figure 3-1 and Figure 3-3 for jumper locations)

Description Label Type Location

Clear CMOS J4 3-pin header CZGG LU-10-X

LCD voltage setup JP1 4-pin header LCDC

LVDS-LUKE-A

CF card setup JP2 3-pin header CZGG LU-10-X

Table 3-3: Onboard Jumpers

3.2 Internal Peripheral Connectors

Internal peripheral connectors are found on the CPU card and are only accessible when

the CPU card is outside of the chassis. This section has complete descriptions of all the

internal, peripheral connectors on the CZGG LU-10-X CPU card and the LCDC

LVDS-LUKE-A expansion daughterboard.

3.2.1 ATX PSON Connector

CN Label: CN4

CN Type: 3-pin header (1x3)

CN Location: See Figure 3-4

CN Pinouts: See Table 3-4

The ATX PSON (CN4) connector connects to the backplane ATX connector. Refer to the

backplane reference documents for more details.