User`s manual

CZGG LU-10-X Series CyberResearch
®
CPU Cards
16 ©Copyright 2007 CyberResearch, Inc.
2.11.1 SATA Drive Support
The CZGG LU-10-X CPU card supports two, first generation SATA drives, with transfer
rates up to 150MB/s.
2.11.2 IDE HDD Interfaces
The CZGG LU-10-X southbridge chipset IDE controller supports up to four HDDs with the
following specifications:
 Supports PIO IDE transfers up to 16MB/s
 Supports Ultra ATA/133 devices with data transfer rates up to 133MB/s
2.11.3 Floppy Disk Drive (FDD)
The CZGG LU-10-X CPU card supports a single FDD. The following FDD formats are
compatible with the board.
 5.25”: 360KB and 1.2MB
 3.5”: 720KB, 1.44MB and 2.88MB
2.11.4 Compact Flash Card
The CZGG LU-10-X CPU card supports standard CFII flash cards.
2.12 Serial Ports
The CZGG LU-10-X CPU card has two high-speed UART serial ports, configured as
COM1 and COM2. The serial ports have the following specifications.
 16C550 UART with 16-byte FIFO buffer
 115.2Kbps transmission rate
2.13 Real Time Clock
256-byte battery backed CMOS RAM
2.14 System Monitoring
The CZGG LU-10-X CPU card is capable of self-monitoring various aspects of its
operating status including:
 CPU, chipset, and battery voltage, +3.3V, +5V, and +12V
 RPM of cooling fans
 CPU and board temperatures (by the corresponding embedded sensors)