User`s manual

CZGG LU-10-X Series CyberResearch

CPU Cards



1 x VGA connector

 2 x RJ-45 Ethernet connectors

 1 x USB 2.0 ports

The location of these connectors on the CPU card can be seen in Figure 1-1. These

connectors are fully described in Chapter 3.

1.2.3 (Optional) LCDC LVDS-LUKE-A Daughterboard Connectors

Figure 1-3 shows the connectors on the front side of the optional LCDC LVDS-LUKE-A

expansion daughterboard.

Figure 1-3: LCDC LVDS-LUKE-A Daughterboard Overview (Front Side)

The LCDC LVDS-LUKE-A has the following connectors onboard and accessible on the

front side of the CZGG LU-10-X (see Figure 1-3):

 1 x LVDS connector

The LCDC LVDS-LUKE-A has one jumper (JP1) accessible on the front side (see Figure

1-3). The jumper is used to set the voltage for the LVDS display.

1.3 Technical Specifications

1.3.1 CZGG LU-10-X CPU card Technical Specifications

CZGG LU-10-X CPU card technical specifications are listed in Table 1-2. Detailed

descriptions of each specification can be found in Chapter 2 Detailed Specifications.