User`s manual

CZGG LU-10-X Series CyberResearch

CPU Cards

D.9 Speaker Configuration

Figure D-10: Speaker Configuration

In this functional window, you can configure your multi-channel speaker settings.

Select the audio configuration from the No. of Speakers section on the left by clicking on

one of the check circles.

The configurable options are:

 Headphone

 Channel mode for stereo speaker output

 Channel mode for 4 speaker output

 Channel mode for 5.1 speaker output

 Synchronize the phonejack switch with speakers settings

Select a speaker configuration by selecting its check circle, and then click OK to apply the

configuration change.

Connect your speakers to the corresponding phonejacks. It is recommended you write

down your configuration, power off the system, and then complete the physical

connections.

Select from the Phonejack Switch section if you want to re-define the phonejacks. Click

the specific phonejack button for several times to change its input/output functionality.