User`s manual

CZGG LU-10-X Series CyberResearch

CPU Cards

D.2 Physical Connection

Figure D-2: Audio Kit Connectors

The audio kit comes with a PCI slot bracket for the installation into a PC case or

rackmount chassis. Connect the 10-pin header to the AUDIO1 header as shown in

Figure E-1, and if necessary, connect the CDIN1 and AUXIN1 to optical drives or other

audio sources, e.g., an MPEG card, using a 4-pin cable. Note that depending on the

devices you connect to, the phone jacks have different functions with different audio

installation modes (2 channel or 5.1 channel modes).

D.3 Driver Installation

The driver installation has been described in Chapter 6, Section Step 7:.

After reboot, you should be able to find the sound effect configuration utility in Windows

Control Panel (see Figure D-3); and if peripheral speakers have been properly connected,

hear the sound effects.