User`s manual

CZGG LU-10-X Series CyberResearch
®
CPU Cards
108 ©Copyright 2007 CyberResearch, Inc.

Disabled
Disables PS/2 mouse support and prevents the PS/2
mouse port from using system resources.

Enabled
Allows the system to use a PS/2 mouse.

Auto
(Default) Allows the system to automatically detect if a PS/2
mouse is being used.
 Wait For ‘F1’ If Error [Enabled]
The Wait For ‘F1’ if Error option specifies how the system responds when the system
detects an error on boot up.

Disabled
If there is an error when booting up, the system does not
wait for user intervention but continues to boot up in the
operating system. Only use this setting if there is a
known reason for a BIOS error to appear. An example
would be a system administrator must remote boot the
system. The computer system does not have a keyboard
currently attached.

Enabled
(Default) If there is an error during boot up, the system waits for a
user to press “F1” and enter the BIOS to rectify the
problem. The BIOS can then be adjusted to the correct
settings.
 Hit ‘DEL’ Message Display [Enabled]
The Hit “DEL” Message Display option specifies whether the instruction to hit the delete
button to enter BIOS during POST appears or not.

Disabled
No message displayed during POST

Enabled
(Default) Displays “Press DEL to run Setup” message in
POST
 Interrupt 19 Capture [Disabled]