User`s manual

CZGG LU-10-X Series CyberResearch
®
CPU Cards
102 ©Copyright 2007 CyberResearch, Inc.

Yes
This setting allows the operating system to change the
interrupt, I/O, and DMA settings. Set this option if the system
is running Plug and Play aware operating systems.
 PCI Latency Timer [64]
The values stipulated in the PCI Latency Timer are in units of PCI clock cycles for the PCI
device latency timer register. Configuration options are:
 32
 64 (Default)
 96
 128
 160
 192
 224
 248
 Allocate IRQ to PCI VGA [Yes]
The Allocate IRQ to PCI VGA restricted the system from giving the VGA adapter card an
interrupt address.

Yes
(Default) Assigns an IRQ to a PCI VGA card if card requests IRQ

No
Does not assign IRQ to a PCI VGA card even if the card
requests an IRQ
 Palette Snooping [Disabled]
The Palette Snooping enables or disables the palette snooping function.

Disabled
(Default) Unless the VGA card manufacturer requires palette
snooping to be enabled, this option should be disabled.

No
PCI devices are informed that an ISA based Graphics
device is installed in the system so the ISA based
Graphics card functions correctly. This does not
necessarily indicate a physical ISA adapter card. The