User`s manual

CYRAQ 17A Series CyberResearch

Displays

4.1.2 USB Cable Connection

1. Shutdown your computer.

2. Plug the USB cable into the display’s USB connector on the back of the

enclosure.

3. Plug the other end of the USB cable into a free USB port on the back of the

computer.

4.1.3 Touchscreen Driver Installation

1. Reboot your computer.

2. After Windows loads, put the CYRAQ Software & Manuals CD into the CD

drive.

Figure 8: Splash Screen

3. When the splash screen appears (Figure 8: Splash Screen) click on Install Drivers.