User`s manual

CYRAQ 17A Series CyberResearch
®
Displays
16 ©Copyright 2007 CyberResearch, Inc
3. With a second
person holding the
display in place at
the front of the
panel, insert
Mounting Clamps
into slots on rear of
display, as shown.
Figure 3: Insert Mounting Clamps Illustration
4. Ensure that hooks
on clamp, butt
against rear of slot
as shown in Figure
4.
5. Tighten Mounting
Clamps with
Phillips head
screwdriver, until
snug.
Figure 4: Tighten Mounting Clamp Illustration