User`s manual

CYRAQ 17A Series CyberResearch

Displays

2.3 Panel Mounting

Prior to performing subsequent steps, ensure the panel-mounting location (including

panel thickness) is suitable for the C

YRAQ

17A, and meets Environmental requirements

in the General Specifications section.

NOTE: Panel thickness should not exceed: .55" (14.1mm) if the unit has the standard

3.2mm (1/8") Poron™ gasket installed. Suggested panel thickness is calculated based on

standard CYRAQ 17 parts and dimensions, custom units may not meet these

specifications. Prior to panel mounting a CYRAQ 17A, the included gasket must be

affixed to the rear of the enclosure.

2.3.1 Panel Mounting the Monitor

1. Cutout dimensions are: 15.12" (384mm) W x 13.62" (346mm) H for portrait

installation.

2. Install CYRAQ 17 in panel cut out. Ensure Poron

™

gasket on the rear of the unit is

flush against panel (critical for NEMA compliance).

- - - Illustrations Begin On Next Page - - -