User`s manual

CYRAQ 17A Series CyberResearch

Displays

2.2 Rack Mounting

IMPORTANT! Ask yourself these questions before beginning installation:

1. Is sufficient power is available?

2. Is sufficient space is available to allow for proper airflow both inside and around

the display?

3. Is there a possibility the air temperature inside the rack will exceed the C

YRAQ

17’s rated specification? (Operating temperature: 32°F....122°F ((0°C....50°C)).)

NOTE: Though this product is designed to operate up to 122°F (45°C) with proper

ventilation, the life span of any electronic device is shortened when it is consistently

operated at high temperatures—keep rack temperature as low possible

4. Is there a possibility that the ambient humidity around the display will exceed its

rated specification? (Relative Humidity, non-condensing: 5%....95%)

2.2.1 Installation

NOTE Subsequent steps require two people.

1. Align holes in the front bezel with server rack mounting holes.

2. A second person should install the eight 10-32 x 1/2″ button head bolts through

rack-mounting holes in bezel and into the server rack (see Figure 1).

3. From inside rack, install and tighten mounting nuts (if applicable).