User`s manual

CYRAQ 17A Series CyberResearch

Displays

1.3 Product Safety and Regulatory Information

Environment

1. Dewdrop atmosphere must be avoided.

2. Do not operate and/or store in high temperature and/or high humidity

atmosphere. If customer stores the product, keep in antistatic pouch at room

temperature.

3. Do not operate in high magnetic field—circuit boards may be broken down by

it.

4. Use an original protection sheet on product surface (polarizer). Adhesive type

protection sheet should be avoided, because it may change color and/or

properties of the polarizer.

Specification for Products

1. Do not display a fixed pattern an extended period of time, it may cause image

sticking. If a fixed pattern is displayed on the screen, use a screen saver.

2. This product’s luminance is affected by voltage variation, even if power source

applies the recommended voltage to backlight inverter.

4. Optical characteristics may be changed by input signal timings.

Others

1. All GND, GNDB, VDD and VDDB terminals should be connected without a

non-connected signal line.

2. Do not disassemble the product.

3. If customer would like to replace backlight lamps, contact CyberResearch, Inc.

4. If customer users rivets, do not to leave waste material in inside of display.

5. When customer returns product for repair and so on, pack it with original

packaging to avoid damage during shipping.

General specifications for the LCD

The following items are neither defects nor failures.

1. Response time, luminance and color gamut may change with ambient

temperature.

2. Optical characteristics ( e.g. luminance, display uniformity, etc. ) gradually is

going to change depending on operating time, and especially low temperature,

because the LCD has cold cathode fluorescent lamps.