User`s manual

CyberResearch
®
Displays CYRAQ
®
21
4.2.4 Calibration Test
This is the last screen displayed in the calibration process.
1. Touch the screen and notice if the calibration target is displayed under your finger
or stylus. If the target appears directly under your finger, select the Accept button.
2. If the target does not appear directly beneath your finger or stylus, select the
Cancel button, reconfigure your calibration options and recalibrate until you get
an acceptable calibration. You may adjust the Offset, or try a different calibration
scheme.
3. Select Accept to apply and record your calibration data.
4. Select Cancel to return to the calibration tab. Once you return to the calibration
tab, select OK or Apply to save your settings.
5. If you have multiple displays return to the Screen Selection tab and select another
display to calibrate.
Figure 24: Calibration Target
CyberResearch, Inc. 39
25 Business Park Drive P: [phone]; F: [phone]
Branford, CT USA www.cyberresearch.com