User`s manual

CYRAQ

21 CyberResearch

Displays

4.1.2 USB Cable Connection

1. Shutdown your computer.

2. Plug the USB cable into the display’s USB connector on the back of the

enclosure.

3. Plug the other end of the USB cable into a free USB port on the back of the

computer.

4.1.3 Touchscreen Driver Installation

1. Reboot your computer.

2. After Windows

loads, put the CyberResearch Software and Utilities DVD into

the drive.

Figure 21: Splash Screen

3. When the splash screen appears (Figure 21) click on Install Drivers

4. Then click TouchScreen (Figure 22)