User`s manual

CYRAQ

21 CyberResearch

Displays

4.2.3 Calibration Routine

1. Click/touch the calibration target seen in Figure 23 to begin calibration routine.

Figure 23: Calibration Target

2. Follow the on-screen prompts to complete calibration process.

Once you have selected the large calibration target from the control panel, the

calibration program will begin.

3. As each target is displayed on the screen TOUCH and hold the center of each

target as directed by the text located adjacent to each target.

4. Touch the center of each target as accurately as possible.

Hampshire calibration targets have been specially developed to assist you in calibrating

your touchscreen as accurately as possible.

5. As each target is displayed, touch and hold the center of each calibration target

until it shrinks and the Hold text changes to Release.

The calibration screen will automatically time out and return you to the control panel if

the first point is not touched within 10 seconds. This time-out feature has been added to

the calibration program to insure that you can exit the calibration screen in the event that

you have a damaged our disconnected touchscreen. This time-out feature may also be

configured for other time-out values.