User`s manual

CYRAQ

21 CyberResearch

Displays

¾ The refresh rate may be set too high. The refresh rate of an LCD

monitor doesn’t need to be set as high as a CRTs refresh rate; set the

refresh rate @ 60Hz.

¾ Incorrect power source.

¾ The video cable isn’t tightly connected at one or both ends; reconnect

and tighten the cable adapter screws.

¾ The analog and DVI cables are both connected to the display and the

same computer.

¾ The display is reading the wrong video input; push the Exit/Source

button to toggle between the VGA and DVI inputs.

¾ The unit is malfunctioning.