User`s manual

CYRAQ
®
21 CyberResearch
®
Displays
22 ©Copyright 2008 CyberResearch, Inc
Figure 15: Mounting Arm to Display
Figure 16: Mounting Arm Base to Clamp
Figure 17: Adjust Weight Capacity
8) Secure arm to the clamp with 4 flat head
screws (Figure 16); tighten using the “L”
shaped hex key.
7) Secure the arm/adapter plate
assembly to the display.
9) Use the “T” hex key provided to
adjust the weight capacity (Figure 17).
a. Carefully support the main
body of arm while gently
pushing downward
b. Turn hex key
counterclockwise
(toward ‘-’) to decrease
capacity
c. Clockwise (toward ‘+’) to
increase capacity
3 NOTE: Check arm capacity setting prior to
installation.
VESA
Arm
SWC 100
Rear o
f
CYRAQ 21