User`s manual

CYRAQ
®
21 CyberResearch
®
Displays
20 ©Copyright 2008 CyberResearch, Inc
3 NOTE: Steps 3 & 4 require a second person
3. With a second
person holding the
display in place at
the front of the
panel, insert
mounting clamps
into slots on rear of
display, as shown.
Figure 8: Insert Mounting Clamp
4. Ensure that hooks
on clamp, butt
against rear of slot
as shown in Figure
9
5. Tighten mounting
clamps with Phillips
head screwdriver
until snug.
Figure 9: Tighten Mounting
Clamp