User`s manual

CYRAQ

21 CyberResearch

Displays

2.4 Flush Panel-Mounting: CPxF/CPxR 21C

Prior to performing subsequent steps, ensure the panel-mounting location (including

panel thickness) is suitable for the C

YRAQ

21, and meets Environmental requirements

in Specifications section.

NOTE: Panel thickness should not exceed: .55" (14.1mm) Suggested panel thickness

is calculated based on standard CYRAQ 21 parts and dimensions, custom units may not

meet these specifications. Poron

™

gasket is installed by CyberResearch, Inc. on CPBF &

CPBR 21 models.

2.4.1 Panel Mounting the Monitor

1. Panel cutout is 401mm H x 487mm W for landscape installation (Figure 7).

2. Install the display in panel cut out. Ensure and Poron

™

gasket on the rear of the

unit is flush against panel (critical for NEMA compliance).

See Next Page For Illustration