User`s manual

CyberResearch
®
Displays CYRAQ
®
21
CyberResearch, Inc. 41
25 Business Park Drive P: [phone]; F: [phone]
Branford, CT USA www.cyberresearch.com
3.2.5 Adjust VGA Input Picture Quality
3.2.5.1 MagicBright Preset Configurations
Select VGA (analog) Source, then Menu > Picture > MagicBright
Currently four different preset modes are available: Text, Internet, Entertain and Custom.
Each mode has its own pre-configured brightness value. You can easily select one of four
settings by simply pressing the Menu button.
3.2.5.2 Custom
Adjust brightness and contrast to personal preference.
Select VGA Source, then Menu > Select Picture > Custom
1. Contrast: Adjust the Contrast.
2. Brightness: Adjust the Brightness.
3.2.5.3 Image Lock
Select VGA Source, then Menu >Select Picture > Image Lock
Image Lock is used to fine-tune and get the best image by removing noise that creates
unstable images with jitter and shimmer. If satisfactory results are not obtained using the
Fine adjustment, use the Coarse adjustment and then use Fine again. This option also
allows you to adjust the image location relevant to the edges of your monitor.
Available in Analog Mode Only
1. Coarse: Removes noise such as vertical stripes. Coarse adjustment may move the
screen image area. You may relocate it to the center using the Horizontal Control
menu
2. Fine: Removes noise such as horizontal stripes. If the noise persists even after
Fine tuning, repeat it after adjusting the frequency (clock speed).
3. Sharpness: Adjust the Sharpness.
4. H-Position: Adjusts the screen location horizontally.
5. V-Position: Adjusts the screen location vertically.