User`s manual

CYRAQ
®
21 CyberResearch
®
Displays
22 ©Copyright 2006 CyberResearch, Inc
2.5 VESA Mounting: CVBF/CVBR 21
Figure 10: 100 x 100mm VESA Mounting Holes
Figure 11: VESA Arm Clamp
Figure 12: Affix Clamp to Benchtop
Figure 13: SWC 100 Adapter Mounting Plate
Figure 14: Remove Screw
o
n
3 NOTE: These are “Quick Install”
instructions for a popular style bench-top
mount VESA arm. This VESA arm style
MAY NOT be the mounting choice you’ve
selected for your CYRAQ. Check the
documentation accompanying your VESA
arm.
1) Disconnect the power, video and
touchscreen cables.
2) Secure cranking unit (#1) to bracket
(#2) with at least two bolts (Figure
11). The use of bolts and bolt position
depends on thickness of desk. Fully
secure bolts with included “T” type
hex key.
3) Secure the clamp to the desk/bench
top Figure 12). This will make
subsequent installation easier. The
clamp is capable of securing the arm
to surfaces 15-100mm thick (30mm
and up is ideal).
4) Before continuing, remove the screw
from the arm’s base using a Philips
head screw driver (Figure 14).
5) Carefully place display on the bench
top with screen facing down, as seen
in Figure 15.
3 NOTE: The SWC 100 permits 100 x
100mm VESA monitors and 75 x 75mm
VESA arms to be used jointly.
6) Secure the SWC 100 adapter (Figure
13) to the VESA arm.
100 x
100
VESA