User`s manual

CYRAQ

21 CyberResearch

Displays

2.3.2 Panel Mounting the Monitor

1. Panel cutout is 356mm H x 440mm W for landscape installation (Figure 6).

2. Install CYRAQ

in panel cutout. Ensure all studs clear cutout opening and

Poron

™

gasket on the rear of the unit is flush against panel (critical for NEMA

compliance).

NOTE: Steps 3 & 4 require a second person

3. Align studs on the CYRAQ with the holes in mounting plate from the rear of

panel (as seen in Figure 6).

Important!

Do not exceed 30 in/lbs when tightening mounting nuts.

4. Also from rear of the panel, second person must install and tighten the fourteen

5. 10-32 mounting nuts.

Figure 6: Panel-Mount Landscape Installation