User`s manual

3.1CABLES AND SCREW TERMINAL BOARDS
The board has a 100-pin, high-density Robinson-Nugent male connector (Figure 3-1).
A CBL 100xx cable is used to split the 100 I/O lines into two, 50-wire cables. One
connector has pins 1 to 50, the other has 51 to 100. The two I/O connectors can be
connected directly to two screw-terminal boards such as the CYSTP 50E,
STA 100, STA 50H or CYSTP 502E. See Figures 3-2 and 3-3 for
configuration and pin out.
3 I/O Connections
3