Specifications

DIGITAL I/O
157
Toll-Free Assistance: 1
-
800
-
341
-
2525
(
USA
)
Tel: 203
-
643
-
5000 Fax: 203
-
643
-
5001
www.cyberresearch.com
Applications Engineers: Monday Friday, 9:00 AM 5:00PM, U.S. Eastern Time • e-mail: info@cyberresearch.com Visit our website for detailed product information!
Monitor & Control High-Voltage AC or DC from Your PC!
48 Isolated Inputs
:
5 to 24V
DC
Inputs, 500V Isolation
The CYISO 48 is a 48-channel isolated interface board which
allows you to directly monitor AC or DC power lines with your
PC. Isolation voltage is a minimum of 500V channel-to-channel
and channel-to-ground. The CYISO 48 has two 50-pin connec-
tors which each carry 24 isolated inputs. Each input has two
contacts (which are not polarity sensitive) that can be mixed
between 5 and 24VDC or VAC (50
~
1000Hz). Inputs are not TTL
compatible. Connecting an input is as easy as connecting one
side of the contact to pin 1 and the other to pin 2.
8, 16, or 32 Electromechanical Relays on a PC Card
These relay boards save you the cost of buying a digital I/O
controller and then needing a separate terminal panel with
mechanical or solid-state relays. The CYREL 8, 16, & 32 have
both the controller and 8, 16, or 32 relays built directly onto the
board to provide you with a complete, all-in-one package.
All of the relays are full SPDT Form C. The contacts are
rated 5A@120VAC or 6A@28VDC with resistive load (3A @120VAC
or 3A @28VDC on CYREL 32). Each channel offers 500VDC
isolation between I/O connections and your PC. Operate time:
20 ms; release time: 10 ms; contact life: 100 million operations.
Controlling the relays is easy. Each 8 relays are addressed
as an 8-bit port. An 8-bit byte is written to the output port.
Each of the 8 bits per individual byte controls the on/off status
of one relay. Writing a “0” to a bit deactivates that relay, while
writing a “1to a bit activates the relay. Drivers are not supplied
with our CYREL boards, as programming is as simple and direct
as it can get — just use the I/O statements included in virtually
all programming languages.
Opto-22 Compatibility
:
C
Y
DUAL AC5 Solid-State Relay Driver
If you are designing a system around CY PB24 solid-state
relay racks (see web) and want a reasonably-priced, high quality
solid-state relay driver board, choose the CYDUAL AC5 (ISA
bus) or CYDUAL AC5P (PCI bus). These cards control up to 48
devices and include such features as:
Electrical and pinout compatibility with OPTO/Gordos AC5.
48 high-drive digital I/O lines (64mA) designed to drive solid-
state relays, electromechanical relays, and LEDs directly.
Connectors pin-to-pin compatible with Opto-22 PB racks; use
CBL 10005E cable with PCI model, or CY PBC24 with ISA model.
Directly control two PB24 solid-state relay racks.
Easy to program using 8255 Mode 0 Control register or AC5
software. Unlike the OPTO/Gordos AC5, the CYDUAL AC5 must
be programmed port-by-port as input or output (card has four
8-bit & four 4-bit ports). I/O direction is not bit-programmable.
See pg. 154 & our website for information on solid-state relays,
solid-state relay mounting panels, and related accessories.
8 or 16 Isolated Inputs & 8 or 16 Relays
:
All on 1 Board!
The CYPDISO 8 is a low-cost, 8-channel isolated interface
board which allows you to directly connect your PC to AC or DC
power lines. It’s a drop-in replacement for the PDISO-8
from MetraByte. Isolation voltage is a minimum of 500V
channel-to-channel and channel-to-ground. The CYPDISO 8 has
one DB-37 connector which carries 8 isolated inputs. Each
isolated input has two contacts which are not polarity sensitive
and may be mixed between 5 to 24VDC or VAC (50
~
1000Hz).
Connecting an input is as easy as connecting one side of the
contact to pin 1 and the other to pin 2. Inputs not TTL-compatible.
Data is written to all 8 relays and read from all 8 inputs as
a single byte. Each of the 8 bits per individual byte controls the
status of 1 relay or confirms the status of 1 input line.
No driver is supplied with the C
YPDISO 8; just use the I/O
statements included in virtually all programming languages.
The C
YPDISO 16 is two CYPDISO 8s on one card with two
50-pin connectors (each maps to a DB-37 with #CBL 3750 cable).
Ordering Information:
Visit cyberresearch.com for detailed information.
#CYPDISO 8 ISA: 8 Mech. Relays + 8 Isolated Inputs, 37-pin.....$295
#CYPDISO 16 ISA: 16 Mech. Relays + 16 Isolated Inputs,
50-pin..$545
#CYPDISO 8P PCI (5V) version of C
YPDISO 8, 6.8"L, 37-pin.........$295
#CYPDISO 16P PCI (5V) version of C
YPDISO 16, 12.25"L,
50-pin
...$425
#CYREL 08 ISA: 8 Mechanical Relays
(Form C SPDT), 50-pin
.........$245
#CYREL 16 ISA: 16 Mechanical Relays
(Form C SPDT), 50-pin......$345
#CYREL 32 ISA: 32 Mech. Relays
(Form C SPDT), two 50-pin
........$545
#CYISO 48 ISA: 48 Isolated (500V) Digital Inputs,
two 50-pin
..$725
#CY
DUAL AC5
ISA: 48-bit High-Drive
Opto 22 AC5 compat., two 50-pin
..$245
#CY
DUAL AC5P
PCI (5V) version of CYDUAL AC5,
100-pin conn.
......$195
#CBL 3750 Brings 50-pin header on CYPDISO 16 out to DB-37 backplate ..$25
#CBL 10005E Breaks out 100-pin on CYDUAL AC5P to 2 50-pin edge conns ...$65
CYDUAL AC5P
One 100-pin
Robinson-Nugent
connector
Opto/Gordos
AC5-compatible.
Cable compatible
with PB8, 16, & 24
IMPORTANT:
Cables to connect
C
YDUAL AC5/AC5P’s
connector(s) &
the CY PB24 panel’s
card-edge connector:
ISA: use CY PBC24
PCI: use CBL 100050E
CYISO 48
Two 50-pin
header
connectors
Each cable
carries 24
isolated inputs
Occupies 6 I/O
base addresses
CAUTION: Use great care when connecting to high voltages. Protective wiring enclosures
recommended. See pages 140 and 156 for terminal panels and cabling options.
(High-voltage protective cover not shown)
CYPDISO 16P
C
YPDISO 8P
C
YPDISO 8P 8 Mechanical relays & 8 isolated inputs (500V max.)
Just 7" long.
Just 12.33" long.
DB-37 connector,
same pinout as PDISO-8
Two 50-pin
headers with
a C
YPDISO 8
on each!
Functionally
similar to the
K/M PIO-32I/O
To match existing KM PDISO-8 wiring, each 50-pin header connector
can be mapped to a standard DB-37 with our #CBL 3750 – see pg. 140.
8 electromechanical relays:
5 form C SPDT relays &
3 form A SPST relays
Rated to 6A @ 28V
DC or 120VAC,
resistive
Operate time 20 ms, Release 10 ms
CYPDISO 16P 16 Mechanical relays & 16 isolated inputs
(
500V max.
)
CYREL 8/16/32 8, 16, or 32 Electromechanical form C SPDT relays
CYREL 16: Just 8.8" long.
50-pin header connector
perfect for ribbon cable
Choose 8 or 16 SPDT form C
relays rated to 5A@ 120V
AC,
6A@28V
DC w/resistive load.
32-relay model is full-length,
with relays rated 3A @ 120V
AC.
Relay contacts: gold overlay silver
CYISO 48 48 Isolated inputs (500V isolation)
CYDUAL AC5P Dual Opto/Gordos AC5/PB Relay Rack Digital I/O Board
156-157.08$ 12/22/10 3:56 PM Page 2