Specifications

ManualsBrandsCyberResearch ManualsComputer equipmentCYDIO 96P

DIGITAL I/O

160

www.cyberresearch.com

Toll-Free Assistance: 1

800

341

2525

(

USA

)

Tel: 203

643

5000 Fax: 203

643

5001

Visit our website for detailed product information! Applications Engineers: Monday – Friday, 9:00 AM – 5:00PM, U.S. Eastern Time • e-mail: info@cyberresearch.com

Opto 22® Compatible High-Density Digital I/O Boards — Use Straight-Through Cables!

PCICTM 12

12-Channel

Counter/Timer and Digital I/O Card

Our PCICTM 12 is a half-length, PCI-based general

purpose counter/timer and digital I/O card. It has four

8254 counter/timer chips on board, providing twelve

16-bit down counters or dividers (binary or BCD).

Unlike many older counter cards, the PCICTM 12

provides user access on the connector to the External

Clock Input, Gate, and Output signal lines of all twelve

counter/timer circuits.

The PCICTM 12 is capable of a variety of different

configurations that provide it with the versatility to

match a wide range of industrial and laboratory appli-

cations (event counter, frequency generator/synthesizer,

pulse width generator, etc.). Two counters can be set as

independent or cascaded (based on an 8MHz clock) and

the gate control for the counters can be an internal or external clock source.

The PCICTM 12 allows for two interrupt sources, one of which originates from the output of counter #12.

The other interrupt signal can originate from an external source. This interrupt signal can be utilized as

a watchdog timer or for other applications (maximum interrupt time interval is 536 seconds). When an

external clock or external interrupt is used, a programmable debounce function can be enabled or disabled

by the user via a jumper setting. The card also provides 8 digital input channels and 8 digital output

channels which are TTL compatible and can be used to control and monitor external devices.

Input and output signals are accessed via a DB-100 high-density female 100-pin connector (see pinout

diagram at right). The card is fully plug-n-play, eliminating the need for preplanned configuration modifications

to your system. For users who write their own programs, the PCICTM 12 is supported by a comprehensive

set of drivers and programming tools. For a complete list of currently available drivers, please visit our website.

In addition, the PCICTM 12 can be linked to popular packages such as DASYLab® and LabVIEW

. DAQBench

provides ActiveX controls for Win98/NT programming (see website for details).

Operating Temp.: +32ºF to +140ºF (0ºC to +60ºC).

Storage Temp.: –4ºF to +176ºF (–20ºC to 80ºC).

Humidity: 5% to 95%, noncond. Dimensions: 6.4"L x

4.3"H (163 x 108mm). See page 165 for cabling.

PCIDIO 96H: 96 I/O Lines, 24 mA Sink

PCIDIO 24H & 48H: 24 or 48 I/O Lines

PCICTM 12: 12 Counter / Timers

Ordering Information: Visit cyberresearch.com for detailed information.

#PCIDIO 24H PCI (5V) 24-channel Digital I/O Card, 24mA/Channel Sink

.......

$120

#PCIDIO 48H PCI (5V) 48-channel Digital I/O Card, 24mA/Channel Sink

.......

$225

#PCIDIO 96H PCI (5V) 96-channel Digital I/O Card, 24mA/Channel Sink

.......$375

Ordering Information: Visit cyberresearch.com for detailed information.

#PCICTM 12 PCI (5V) 12-channel Counter/Timer and Digital I/O Card

......................$375

+5V

JPn

Fuse

I/O Port C-7

I/O Port C-6

I/O Port C-5

I/O Port C-4

I/O Port C-3

I/O Port C-2

I/O Port C-1

I/O Port C-0

I/O Port B-7

I/O Port B-6

I/O Port B-5

I/O Port B-4

I/O Port B-3

I/O Port B-2

I/O Port B-1

I/O Port B-0

I/O Port A-7

I/O Port A-6

I/O Port A-5

I/O Port A-4

I/O Port A-3

I/O Port A-2

I/O Port A-1

I/O Port A-0

A jumper allows

you to connect

+12V or Ground

to pins 2 & 4 on

each connector.

+ 12 V

Fuse

Note: pin assignments

of all connectors

are identical.

100

Ground

Inverter Out 2

Inverter In 2

Ground

Inverter Out 1

Inverter In 1

Interrupt In

Digital In 7

Digital In 5

Digital In 3

Digital In 1

Digital Out 7

Digital Out 5

Digital Out 3

Digital Out 1

N/C

Counter Out 12

Ground

Counter Out 11

Ground

Counter Out 1Ø

Gate 1Ø

Ext Clock In 1Ø

Counter Out 9

Gate 9

Ext Clock In 9

Counter Out 8

Gate 8

Ext Clock In 8

Counter Out 7

Gate 7

Ext Clock In 7

Counter Out 6

Gate 6

Ext Clock In 6

Counter Out 5

Gate 5

Ext Clock In 5

Counter Out 4

Gate 4

Ext Clock In 4

Counter Out 3

Gate 3

Ext Clock In 3

Counter Out 2

Gate 2

Ext Clock In 2

Counter Out 1

Gate 1

Ext Clock In 1

+12V

+5V

N/C

Digital In 6

Digital In 4

Digital In 2

Digital In Ø

Digital Out 6

Digital Out 4

Digital Out 2

Digital Out Ø

N/C

Ground

PCICTM 12

Our PCIDIO 24H, 48H, and 96H are high-density

parallel digital I/O boards with 24, 48, & 96 channels,

respectively. Each of the 50-pin header connectors

on these boards is fully compatible with industry-

standard Opto 22 I/O module mounting racks, such as

our CY PB24 (see website). Each connector has pins

for +5V power, with jumper-selectable +12V power

(see diagram at right). These cards are completely

plug-&-play, requiring little if any configuration.

• Parallel Digital I/O: On-board circuits emulate 8255

PPI chips; each connector carries 24 digital I/O lines,

and can sink 24mA of current on each channel.

• Programmable Counter/Timer: An 82C54 chip

includes three 16-bit counter/timers; one acts as an

event counter, the remaining two cascade together to

form a single 32-bit counter that can control interrupt

generation.

• Dual Interrupt Sources: To allow for added

versatility when used in industrial applications,

these boards can accept two different interrupt

sources: one from the I/O port or event counter, the

other from the I/O port or timer chip. Interrupts can

be disabled via software for plug-and-play.

Quantities of a Single Item Per Shipment – Call for Details

UANTITY

ISCOUNTS

4/L

IST

9/5% 10

24/10% 25+/C

ALL

160-161.06$ 12/8/10 3:10 PM Page 1