User`s manual

CZGA LX-50 CyberResearch

CPU Cards

Figure 5-4: AT Power Select Jumper Location

5.6.2 CF Card Setup

Jumper Label: JP6

Jumper Type:

3-pin header

Jumper Settings: See Table 5-3

Jumper Location: See Figure 5-5

The CF Card Setup jumper sets the CF Type I card or CF Type II cards as either the slave

device or the master device. CF Card Setup jumper settings are shown in Table 5-3

CF Card Setup Description

1-2 Slave Default

2-3 Master

Table 5-3: CF Card Setup Jumper Settings

The CF Card Setup jumper location is shown in Figure 5-5.