User`s manual

CyberResearch
®
CPU Cards CZGA LX-50
CyberResearch, Inc. 75
25 Business Park Drive P: [phone]; F: [phone]
Branford, CT USA www.cyberresearch.com
socket, the handles must be opened. See Figure 5-1.
Step 2: Align the DIMM with the socket. The DIMM must be oriented in such a way
that the notch in the middle of the DIMM must be aligned with the plastic bridge
in the socket. See Figure 5-1.
Step 3: Insert the DIMM. Once properly aligned, the DIMM can be inserted into the
socket. As the DIMM is inserted, the white handles on the side of the socket will
close automatically and secure the DIMM to the socket. See Figure 5-1.
Step 4: Removing a DIMM. To remove a DIMM, push both handles outward. The
memory module is ejected by a mechanism in the socket.Step 0:
5.5 CF Card Installation
NOTE:
The CZGA LX-50 can support both CF Type I cards and CF Type II
cards. For the complete specifications of the supported CF cards
please refer to Chapter 2.
To install the a CF card (Type I or Type II) onto the CZGA LX-50, please follow the steps
below:
Step 1: Locate the CF card socket. Place the CZGA LX-50 on an anti-static pad with
the solder side facing up. Locate the CF card.
Step 2: Align the CF card. Make sure the CF card is properly aligned with the CF
socket.
Step 3: Insert the CF card. Gently insert the CF card into the socket making sure the
socket pins are properly inserted into the socket. See Figure 5-2. Step 0: