User`s manual

CZGA LX-50 CyberResearch
®
CPU Cards
72 ©Copyright 2009 CyberResearch, Inc.
o When working with the CZGA LX-50, make sure that it is disconnected
from all power supplies and that no electricity is being fed into the system.
Before and during the installation of the CZGA LX-50 DO NOT:
 Remove any of the stickers on the PCB board. These stickers are required for
warranty validation.
 Use the product before verifying all the cables and power connectors are
properly connected.
 Allow screws to come in contact with the PCB circuit, connector pins, or its
components.
5.2.2 Installation Checklist
The following checklist is provided to ensure the CZGA LX-50 is properly installed.
 All the items in the packing list are present
 The CPU is installed
 The CPU cooling kit is properly installed
 A compatible memory module is properly inserted into the slot
 The CF Type I or CF Type II card is properly installed into the CF socket
 The jumpers have been properly configured
 The CZGA LX-50 is inserted into a chassis with adequate ventilation
 The correct power supply is being used
 The following devices are properly connected
o Primary IDE device
o SATA drives
o Keyboard and mouse cable
o Audio cable
o Power supply
o USB cable
o Serial port cable
 The following external peripheral devices are properly connected to the
chassis:
o VGA screen
o Keyboard