User`s manual

CZGA LX-50 CyberResearch

CPU Cards

4.2.2 ATX Power Supply Enable Connector

CN Label: CN22

CN Type:

3-pin wafer (1x3)

CN Location: See Figure 4-3

CN Pinouts: See Table 4-4

The ATX power supply enable connector enables the CZGA LX-50 to be connected to an

ATX power supply. In default mode, the CZGA LX-50 can only us an AT power supply. To

enable an ATX power supply the AT Power Select jumper must also be configured. Please

refer to Chapter 5 for more details.

Figure 4-3: ATX Power Supply Enable Connector Location

PIN NO. DESCRIPTION

1 GND

2 PS-ON

3 +5V Standby

Table 4-4: ATX Power Supply Enable Connector Pinouts

4.2.3 Audio Connector

CN Label: CN9

CN Type:

10-pin box header (2x5)

CN Location: See Figure 4-4