User`s manual

CZGA LX-50 CyberResearch

CPU Cards

Step 6: Delete RAID settings and partitions. The RAID BIOS Setup Utility in the

following screen appears. Before configuring the array, select the “Delete All

RAID Setting & Partition”.

Figure F-2: RAID BIOS Setup Utility

Step 7: Configure the RAID settings. Use the RAID BIOS Setup Utility in Chapter 6

to configure the RAID array. Brief descriptions are given below.

Step 8: Install the OS. After the RAID array has been configured (see below) install the

OS. To do this, please refer to the documentation that came with the OS.

Step 0: