User`s manual

CZGA LX-50 CyberResearch

CPU Cards

CAUTION!

Do not accidentally disconnect the SATA drive cables. Carefully route

the cables within the chassis to avoid system down time.

F.2 Features and Benefits

 Supports RAID levels 0, 1, and JBOD

 Supports connectivity to two disk drives

 Supported Operating Systems include: Windows 98/Me, Windows 2000 and

Windows XP

 Windows-based software for RAID management

F.3 Accessing the ALi RAID Utility

To access the Ali RAID Utility, please follow the steps below:

Step 1: Connect SATA drives to the system. Connect two SATA drives to the system.

Make sure the drives have the same capacity, are the same type and have the

same speed.

NOTE:

Make sure the SATA drives are EXACTLY the same when they are

configured in a RAID configuration (JBOD, RAID 0 or RAID 1). If they

are not the same size, disk drive capacity is sacrificed and overall

performance affected.

Step 2: Enable SATA drives in BIOS. Start the computer and access the AMI BIOS

setup program. Next, open the Advanced CMOS Setup menu. Enable the

SATA ROM Support BIOS option.