User`s manual

CZGA LX-50 CyberResearch

CPU Cards

in Chapter 4.

Step 2: Align the connectors. Align the USB device connector with one of the

connectors on the CZGA LX-50. See Figure 5-22.

Figure 5-22: USB Device Connection

Step 3: Insert the device connector. Once aligned, gently insert the USB device

connector into the onboard connector. Step 0:

5.9.4 VGA Monitor Connection

The CZGA LX-50 has a single female DB-15 connector on the external peripheral

interface panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect

a monitor to the CZGA LX-50, please follow the instructions below.

Step 1: Locate the female DB-15 connector. The location of the female DB-15

connector is shown in Chapter 3.

Step 2: Align the VGA connector. Align the male DB-15 connector on the VGA screen

cable with the female DB-15 connector on the external peripheral interface.