User`s manual

CyberResearch
®
CPU Cards CZGA LX-50
CyberResearch, Inc. 97
25 Business Park Drive P: [phone]; F: [phone]
Branford, CT USA www.cyberresearch.com
Step 1: Locate the dual PS/2 connector. The location of the PS/2 connector is shown
in Chapter 3.
Step 2: Insert the keyboard/mouse connector. Insert the PS/2 connector on the end
of the PS/2 y-cable into the external PS/2 connector. See Figure 5-21.
Figure 5-21: PS/2 Keyboard/Mouse Connector
Step 3: Connect the keyboard and mouse. Connect the keyboard and mouse to the
appropriate connector. The keyboard and mouse connectors can be
distinguished from each other by looking at the small graphic at the top of the
connector. Step 0:
5.9.3 USB Device Connection
There are two external USB 2.0 connectors. Both connectors are perpendicular to the
CZGA LX-50. To connect a USB 2.0 or USB 1.1 device, please follow the instructions
below.
Step 1: Located the USB connectors. The locations of the USB connectors are shown