User`s manual

CZGA LX-50 CyberResearch

CPU Cards

5.9.1 LAN Connection (Single Connector)

There are two external RJ-45 LAN connectors. The RJ-45 connectors enable connection

to an external network. To connect a LAN cable with an RJ-45 connector, please follow

the instructions below.

Step 1: Locate the RJ-45 connectors. The locations of the USB connectors are shown

in Chapter 4.

Step 2: Align the connectors. Align the RJ-45 connector on the LAN cable with one of

the RJ-45 connectors on the CZGA LX-50. See Figure 5-20.

Figure 5-20: LAN Connection

Step 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN

cable RJ-45 connector into the onboard RJ-45 connector. Step 0:

5.9.2 PS/2 Y-Cable Connection

The CZGA LX-50 has a PS/2 connector on the external peripheral interface panel. The

dual PS/2 connector is connected to the PS/2 Y-cable that came with the CZGA LX-50.

One of the PS/2 cables is connected to a keyboard and the other to a mouse to the

system. Follow the steps below to connect a keyboard and mouse to the CZGA LX-50.