User`s manual

CyberResearch
®
CPU Cards CZGA LX-50
CyberResearch, Inc. 89
25 Business Park Drive P: [phone]; F: [phone]
Branford, CT USA www.cyberresearch.com
Figure 5-13: Backlight Inverter Connection
5.8.5 Single RS-232 Cable with Slot Bracket
The single RS-232 cable consists of one serial port connectors attached to a serial
communications cable that is then attached to a D-sub 9 male connector that is mounted
onto a bracket. To install the single RS-232 cable, please follow the steps below.
Step 1: Locate the connector. The location of the RS-232 connector is shown in
Chapter 3.
Step 2: Insert the cable connector. Insert the connector into the serial port box header.
See Figure 5-14. A key on the front of the cable connectors ensures the
connector can only be installed in one direction.