User`s manual

CyberResearch
®
CPU Cards CZGA LX-50
CyberResearch, Inc. 87
25 Business Park Drive P: [phone]; F: [phone]
Branford, CT USA www.cyberresearch.com
Figure 5-11: Audio Kit Cable Connection
Step 3: Connect the audio devices. Connect one speaker to the line-in audio jack, one
speaker to the line-out audio jack and a microphone to the mic-in audio jack.
Step 0:
5.8.4 LVDS LCD Installation
The CZGA LX-50 can be connected to a TFT LCD screen through the 20-pin LVDS crimp
connector on the board. To connect a TFT LCD to the CZGA LX-50, please follow the
steps below.
Step 1: Locate the connector. The location of the LVDS connector is shown in
Chapter 3.
Step 2: Insert the cable connector. Insert the connector from the LVDS PCB driving
board to the LVDS connector as shown in Figure 5-18. When connecting the
connectors make sure the pins are properly aligned.
WARNING:
The diagram below is merely for illustration. The configuration and
connection of the cables from the TFT LCD screen being installed may
be different. Please refer to the installation manual that came with the
TFT LCD screen.