User`s manual

CyberResearch
®
CPU Cards CZGA LX-50
CyberResearch, Inc. 85
25 Business Park Drive P: [phone]; F: [phone]
Branford, CT USA www.cyberresearch.com
1 SATA power cable
1 USB cable
Table 5-8: Cables Accompanying your Product
5.8.2 ATA Flat Cable Connection
The ATA 66/100 flat cable connects to the CZGA LX-50 to one or two IDE devices. To
connect an IDE HDD to the CZGA LX-50 please follow the instructions below.
Step 1: Locate the IDE connector. The location/s of the IDE device connector/s is/are
shown in Chapter 3.
Step 2: Insert the connector. Connect the IDE cable connector to the onboard
connector. See Figure 5-10. A key on the front of the cable connector ensures it
can only be inserted in one direction.