User`s manual

CZGA LX-50 CyberResearch

CPU Cards

5.7.2 Backplane Installation

Before the CZGA LX-50 can be installed into the chassis, a backplane must first be

installed. Please refer to the installation instructions that came with the backplane and the

chassis to see how to install the backplane into the chassis.

NOTE:

CyberResearch, Inc. has a wide range of backplanes available. Please

call us or visit our website (http://www.cyberresearch.com

) for

additional information.

5.7.3 CPU Card Installation

To install the CZGA LX-50 CPU card onto the backplane, carefully align the CPU card

interface connectors with the corresponding socket on the backplane. To do this, please

refer to the reference material that came with the backplane. Next, secure the CPU card to

the chassis. To do this, please refer to the reference material that came with the chassis.

5.8 Internal Peripheral Device Connections

5.8.1 Peripheral Device Cables

The cables listed in Table 5-8 are shipped with the CZGA LX-50.

Quantity Type

1 ATA 66/100 HDD cable

1 Audio cable

1 Single RS-232 cable

1 KB/MS Y cable

2 SATA cables