User`s manual

CyberResearch
®
CPU Cards CZGA LX-50
CyberResearch, Inc. 81
25 Business Park Drive P: [phone]; F: [phone]
Branford, CT USA www.cyberresearch.com
Figure 5-7: LCD Clock Jumper Location
5.6.5 LCD Voltage Select Jumper
WARNING!
Making the wrong setting on this jumper may cause
irreparable damage to both the CPU card and the LCD screen
connected to the on-board connector.
Jumper Label: JP2
Jumper Type:
3-pin header
Jumper Settings: See Table 5-6
Jumper Location: See Figure 5-8
This jumper allows the user to set the voltage for the LCD panel. Before setting this jumper
refer to the LCD panel user guide to determine the required voltage. After the required
voltage is known, make the necessary jumper setting in accordance with the settings
shown in Table 5-6.