Owners manual

CyberPower Remote Management System
19
[Logs->Graphing] This page is used to display the data of the Status Record. The graphing function
makes the status records easier to view.
Item
Definition
Graph Period
The period used to draw the graph. Longer periods will require more
time to be displayed.
Graph Data
The data used to draw the graph. The more data selected, the more
graphing time is needed.
Graph Node
Selecting “Display All Nodes in Detail” will display all the points along
the line; moving the cursor on the data point will show the information of
that point.
Launch Graph in New
Window
Checking this box will open the graph in detail in a new page.
[Logs->Syslog] Allow users to set syslog server and send test message.
Item
Definition
Syslog
Enable or disable Syslog function.
Facility Code
Select Syslog facility.
Server IP
The IP address of Syslog server.
Server Port
The UDP port used by the Syslog server.
Send Test
Send test message to Syslog server.
[Logs->Maintenance] This page is used to select “Event Logs” and “Status Records” settings. The
application provides information on how many events are recorded before it is full.
Item
Definition
Event Logs
Clear All Logs
Clear the existing event logs.
The Number of Events
Displays the number of current events logs followed by the maximum
number of events that can be logged.
Save Event Logs
Save the existing event logs as a text file.
Status Records
Recording Interval
Set the frequency status data is recorded. A smaller interval will provide
more frequent recordings but exhaust available memory quicker. A
larger interval will provide less frequent recordings, but save data for a
longer period of time.
Clear All Records
Clear the existing status records.