Owners manual
CyberPower Remote Management System
18
Temperature
High Threshold
Upper limit for normal temperature.
Low Threshold
Lower limit for normal temperature.
Hysteresis
The point at which the difference between the High and Low temperature
threshold changes from abnormal to normal.
Rate of Change
The rate used to define an abnormal change in temperature.
Unit
The unit of temperature measurement.
Humidity
High Threshold
Upper limit for normal humidity.
Low Threshold
Lower limit for normal humidity.
Hysteresis
The point at which the difference between the High and Low humidity
threshold changes from abnormal to normal.
Rate of Change
The rate used to define an abnormal change in humidity.
Contact
Name
The name of the contact person.
State
The state used to define the normal condition of the contact
[Logs->Event Logs] Display the list of events and a brief description of each event along with the date
and time stamp.
Note: 1. The recordable events are listed under “System->Notifications->Event Action.”
2. The recorded time is using the 24-hour clock format.
[Logs->Status Records] This page is used to view the logs of the UPS status and environment status;
however, different products may have different items displayed.
All items have the same definition as they are in the UPS status or environmental status.
• Input min (V): The minimum input voltage of the utility power from the previous record.
• Input max (V): The maximum input voltage of the utility power from the previous record.
• Input (Hz): The current frequency of the utility power supplied to the UPS.
• Output (V): The output voltage of the UPS supplying to the connected equipment.
• Output (Hz): The output frequency of the UPS supplying to the connected equipment.
• Load (%): The percentage of the total UPS power being supplied to the connected equipment.
• Capacity (%): The percentage of the current UPS battery capacity.
• Remaining Runtime: The estimated duration of time that the UPS can support the connected load
in battery mode.
• Temperature (°C or °F): The current temperature of the environmental sensor.
• Humidity (%RH): The current humidity of the environmental sensor.